Zircon® MultiScanner™ A200 Stud Finder Wall Scanner Edge and Center Finding | Find studs before you drill, Detects live AC wiring, Find wood studs, Find metal studs, Mount TVs & shelves confidently

The Zircon® MultiScanner™ A200 stud finder wall scanner is designed for DIYers, homeowners and professionals who want more information before drilling or fastening into walls. Unlike simple edge-only tools, the A200 helps locate the center, edges and direction of wood and metal studs, making it a practical choice for mounting TVs, shelves, cabinets, mirrors, handrails, fixtures and home décor. For best results, calibrate before each scan. Place the scanner flat against the wall, press and hold until the ready signal, then slide slowly while keeping steady contact with the surface. Confirm the target area with a second pass from the opposite direction before drilling or fastening. The A200 includes multiple scan modes for different project needs. StudScan helps locate wood and metal studs, DeepScan® adds extra depth when standard scanning needs more reach, Metal Scan helps identify metal objects such as metal studs, rebar and pipes, and AC Scan helps detect live, unshielded AC wiring. WireWarning® Detection also provides an added alert to live, unshielded AC wiring while scanning. Wire detection features are supplemental alerts and are not a substitute for turning off power or verifying before drilling. The LCD display, audio tone and SpotLite® Pointer help guide scanning and marking, while ACT™ Auto-Correcting Technology helps correct common scanning errors. Performance can vary on dense, textured, irregular or layered surfaces. Requires one fresh, high-quality 9V battery, not included; lithium 9V recommended for best performance.
Multi-Purpose Wall Scanner: Zircon MultiScanner A200 helps locate wood studs, metal studs, edges, centers and stud direction, giving DIYers and pros clearer guidance before mounting TVs, shelves, cabinets, mirrors and fixtures
Correct Calibration for Better Scans: Place scanner flat against the wall, then press and hold the Power Button; wait 1–2 seconds for the short calibration beep and do not move the scanner until calibration is complete before sliding slowly
Three Modes for Precise Detection: StudScan finds wood or metal stud edges and centers up to 3/4 in. deep, DeepScan helps scan deeper up to 1 1/2 in., and Metal Scan helps locate metal behind walls before drilling
Scan and Mark with Confidence: WireWarning Detection helps alert you to hot electrical wires behind the wall, while the LCD display, audio tone and SpotLite Pointer make stud edge and center marking easier before drilling
Low Battery Indicator: Alerts you when battery power is too low for the scanner to work properly, so you know when to replace it with a new 9V alkaline battery with an extended expiration date for optimum performance